Pelatihan Teknik Pengelasan dan Pengecatan Atomozing Bagi Santri Pesantren Anak Yatim Darul Hikmah Cot Yang-Kuta Baro Aceh Besar
Abstract
Islamic boarding schools are traditional educational institutions that prioritize a religion-based curriculum. The Darul Hikmah Orphans Islamic Boarding School, located in Cot Yang Village, Kuta Barou District, Aceh Besar Regency, Aceh Province, faces the challenge of low levels of entrepreneurial skills in the field of welding and atomizing painting due to the absence of this material in their curriculum. To overcome this, atomizing welding and painting training was carried out at Islamic boarding schools, which aimed to improve students' hard skills in this field. This training is also planned to develop business units, including the establishment of atomizing welding and painting workshops. This atomizing welding and painting entrepreneurship training program is measured by several parameters, with the output being the basic welding technical skills obtained by the students. It is hoped that this program will produce entrepreneurs in atomizing welding and painting workshops that will benefit the environment of the Darul Hikmah Cot Yang Orphan Islamic Boarding School. The training implementation stages include welding and painting theory, occupational health and safety (K3), as well as practice and assistance in basic welding and painting, with the final product being a table. The training material was adopted from teaching welding and painting practices at Syiah Kuala Darussalam University-Aceh. The result of this training is an increase in participants' knowledge in welding and painting, as well as their ability to apply these processes by prioritizing K3 (Occupational Safety and Health).
Author Biographies
Program Studi Teknik Mesin, Fakultas Teknik, Universitas Syiah Kuala, Darussalam, Kota Banda Aceh, Provinsi Aceh, Indonesia.
Program Studi Teknik Mesin, Fakultas Teknik, Universitas Syiah Kuala, Darussalam, Kota Banda Aceh, Provinsi Aceh, Indonesia.
Program Studi Teknik Mesin, Fakultas Teknik, Universitas Syiah Kuala, Darussalam, Kota Banda Aceh, Provinsi Aceh, Indonesia.
Program Studi Teknik Mesin, Fakultas Teknik, Universitas Syiah Kuala, Darussalam, Kota Banda Aceh, Provinsi Aceh, Indonesia.
Program Studi Teknik Mesin, Fakultas Teknik, Universitas Syiah Kuala, Darussalam, Kota Banda Aceh, Provinsi Aceh, Indonesia.
Program Studi Teknik Mesin, Fakultas Teknik, Universitas Syiah Kuala, Darussalam, Kota Banda Aceh, Provinsi Aceh, Indonesia.
Program Studi Teknik Mesin, Fakultas Teknik, Universitas Syiah Kuala, Darussalam, Kota Banda Aceh, Provinsi Aceh, Indonesia.
Program Studi Teknik Mesin, Fakultas Teknik, Universitas Syiah Kuala, Darussalam, Kota Banda Aceh, Provinsi Aceh, Indonesia.
Program Studi Pendidikan Fisika FKIP, Universitas Syiah Kuala, Darussalam, Kota Banda Aceh, Provinsi Aceh, Indonesia.
How to Cite
License & Copyright
This is an open-access journal. All articles are distributed under the terms of the Creative Commons Attribution 4.0 International License (CC BY 4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Creative Commons Attribution 4.0 International (CC BY 4.0)Under this license, you are free to:
- Share: copy, distribute, and transmit the work in any medium or format.
- Adapt: remix, transform, and build upon the work for any purpose, even commercially.
You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
Copyright and Retention Copyright & Retention Authors retain copyright without restrictions and grant this journal the right of first publication under an open-access model. The journal retains non-exclusive publishing rights for archiving, indexing, and scholarly dissemination.References
Total: 6 References- Artono, B. (2019). Teknologi Terapan Bidang Pengelasan (2F) Pada Lingkup Masyarakat Pedesaan di Sektor Pertanian. DIKEMAS (Jurnal Pengabdian Kepada Masyarakat), 3(2).
- Heriyanto, F. (2015). Pengembangan Modul Las Listrik Smaw pada Mata Pelajaran Praktik Pengelasan Siswa Kelas XI SMK Negeri 1 Bendo Magetan (Doctoral dissertation, State University of Surabaya).
- Meredith, G. G., Neck, P. A., & Nelson, R. E. (1984). Kewirausahaan: Teori dan praktek. PT. Pustaka Binaman Pressindo, Jakarta.
- Salim, A. T. A. (2017). Modul Praktikum Workshop 1 (Kerja Bangku dan Pengelasan). Madiun: Politeknik Negeri Madiun.
- Salim, A. T. A., Susanto, F., Yuwono, I., Pribadi, W., Setyawan, S. B., Basyar, K. A., ... & Aziz, M. A. (2019). Pelatihan Pengelasan Aplikatif Bagi Santri Pondok Pesantren Tahfidzul Qur’an “Darul Ulum” Magetan. Jurnal Pengabdian UntukMu NegeRI, 3(2), 196-201. DOI: https://doi.org/10.37859/jpumri.v3i2.1500.
Similar Articles
Explore related articles published in this journal.
Strategi Pemasaran Kreatif dalam Meningkatkan Kelayakan Bisnis: Studi Kasus Siswa Pesantren Entrepreneur Global Cahaya Nubuwwah Insani Purwakarta
Pelatihan Pengembangan Media Pembelajaran Digital E-book Menggunakan Flipbook PDF Professional bagi Guru di Kota Banjarmasin
Competency Improvement Through Character Education and Utilization of Digital Technology for SMA and SMK in Bandung and Tasikmalaya (Studies at Islamic Boarding School Ulul Albab Bandung and SMAN 2 Tasikmalaya)
Pelatihan Mengelas dengan Kelengkapan Keselamatan dan Kesehatan Kerja (K3)
Building Business Independence: A Creative Business Workshop for the Indonesian Migrant Community in Malaysia
Most read articles by the same author(s)
Explore other articles by these authors.