Rancang Bangun Untuk Kontruksi Dinding Rumah dengan Bahan Bata Interlok

Yulia Hayati; Sabri; Cut Aprilia; Nurul Malahayati; Cut Nella Asyifa; Munirwansyah; Mochammad Afifuddin

doi:10.56347/kjpkm.v3i1.208

About This Journal

Kawanad: Jurnal Pengabdian kepada Masyarakat is a peer-reviewed journal publishing innovative and impactful community service results. Published biannually in March and October, this journal...

Learn More

Quick Links

Browse

Recent Issues

Browse Archives

Contact Info

Banda Aceh, Indonesia
+6281360650791
masriali@unsyiah.ac.id
Week Days: 09.00 to 17.00
Sunday: Closed

Article

Rancang Bangun Untuk Kontruksi Dinding Rumah dengan Bahan Bata Interlok

Authors Yulia Hayati, Sabri, Cut Aprilia, Nurul Malahayati, Cut Nella Asyifa, Munirwansyah, Mochammad Afifuddin

Affiliations

Yulia Hayati: Universitas Syiah Kuala

Sabri: Universitas Syiah Kuala

Cut Aprilia: Universitas Syiah Kuala

Nurul Malahayati: Universitas Syiah Kuala

Cut Nella Asyifa: Universitas Syiah Kuala

Munirwansyah: Universitas Syiah Kuala

Mochammad Afifuddin: Universitas Syiah Kuala

Published 2024-03-31

Section Article

DOI https://doi.org/10.56347/kjpkm.v3i1.208

Issue Vol. 3 No. 1 (2024): March

26

Views

1.314

Downloads

Altmetrics

Abstract

The type of material, mixture composition, and production process are among the factors that influence the strength of interlock bricks. In this study, interlocking bricks are used for the construction of residential wall structures. The interlocking brick mixture consists of cement, fly ash, sand, and water. The fly ash and sand used have a maximum diameter of 4.75 mm and are not subjected to calcination. Interlocking bricks measuring 30 cm x 20 cm x 10 cm are molded using a manual hydraulic press and cured for up to 28 days before being cut into test specimens measuring 5 cm x 5 cm x 5 cm. A total of 150 test specimens from 5 mix designs using water-cement ratios (WCR) of 0.3, 0.4, and 0.5 were utilized in this study. The objective of this research is to determine the quality levels of interlocking bricks based on compressive strength tests at 28 days of age. The quality levels are determined according to the Indonesian National Standard, SNI 03-0349-1989. Based on the compressive strength results, it was found that the average interlocking bricks with fly ash mixture achieved class III quality, indicating that they can only be used for non-structural wall applications.

Keywords

Interlocking Bricks; Wall; Housing

References

Bredenoord, J., Kokkamhaeng, W., Janbunjong, P., Nualplod, O., Thongnoy, S., Khongwong, W., ... & Mahakhant, A. (2019). Interlocking Block masonry (ISSB) for sustainable housing purposes in Thailand, with additional examples from Cambodia and Nepal. Eng. Manag. Res, 8, 42.
Hasan, M., & Saidi, T. (2020, March). Properties of blended cement paste with diatomite from Aceh Province Indonesia. In IOP Conference Series: Materials Science and Engineering (Vol. 796, No. 1, p. 012034). IOP Publishing. DOI: 10.1088/1757-899X/796/1/012034.
Hasan, M., Saidi, T., Husaini, Jamil, M., & Rhina, Z. (2021). Characteristics of lightweight bricks composed of clay and diatomite. In Proceedings of the 2nd International Conference on Experimental and Computational Mechanics in Engineering: ICECME 2020, Banda Aceh, October 13–14 (pp. 9-19). Springer Singapore.
Hasan, M., Saidi, T., Muyasir, A., Alkhaly, Y. R., & Muslimsyah, M. (2020, September). Characteristic of calcined diatomaceous earth from Aceh Besar District-Indonesia as cementitious binder. In IOP Conference Series: Materials Science and Engineering (Vol. 933, No. 1, p. 012008). IOP Publishing. DOI: 10.1088/1757-899X/933/1/012008.
Joyklad, P., Hussain, Q., & Ali, N. (2020). Mechanical properties of cement-clay interlocking (CCI) hollow bricks. Engineering Journal, 24(3), 89-106. DOI: https://doi.org/10.4186/ej.2020.24.3.89.
Malahayati, N., Hayati, Y., Nursaniah, C., & Firsa, T. (2019, June). Study of Interlocking Brick Costing Based on The Result of Mixed Material Variation Design. In IOP Conference Series: Materials Science and Engineering (Vol. 536, No. 1, p. 012088). IOP Publishing. DOI: 10.1088/1757-899X/536/1/012088.
Malahayati, N., Hayati, Y., Nursaniah, C., Firsa, T., & Munandar, A. (2018, May). Comparative study on the cost of building public house construction using red brick and interlock brick building material in the city of Banda Aceh. In IOP Conference Series: Materials Science and Engineering (Vol. 352, No. 1, p. 012041). IOP Publishing. DOI 10.1088/1757-899X/352/1/012041.
Malahayati, N., Hayati, Y., Sundary, D., & Maulina, F. (2020, September). The effect of water cement ratio (WCR) on compressive strength of interlocking bricks with mix design variations. In IOP Conference Series: Materials Science and Engineering (Vol. 933, No. 1, p. 012050). IOP Publishing. DOI: 10.1088/1757-899X/933/1/012050.
Mohammed, B. S., & Aswin, M. (2016, August). Properties and structural behavior of sawdust interlocking bricks. In Proceedings of the 3rd International Conference on Civil, Offshore and Environmental Engineering, Kuala Lumpur-Malaysia (pp. 437-442).
Saidi, T., Hasan, M., Riski, A. D. D., Ayunizar, R. R., & Mubarak, A. (2020, September). Mix design and properties of reactive powder concrete with diatomaceous earth as cement replacement. In IOP Conference Series: Materials Science and Engineering (Vol. 933, No. 1, p. 012007). IOP Publishing. DOI: 10.1088/1757-899X/933/1/012007.
Watile, R. K., Deshmukh, S. K., & Muley, H. C. (2014). Interlocking brick for sustainable housing development. International Journal of Science, Spirituality, Business and Technology (IJSSBT), 2(2), 58-64.