Program Pendampingan Penguasaan Cetak Massal untuk Pengembangan Industri Kreatif Rencong Souvenir

Husni Husni; T. Edisah Putra; Husaini; Arhami; Masri Masri; M. Nizar Machmud; M Nural Fajri

doi:10.56347/kjpkm.v4i1.297

About This Journal

Kawanad: Jurnal Pengabdian kepada Masyarakat is a peer-reviewed journal publishing innovative and impactful community service results. Published biannually in March and October, this journal...

Learn More

Quick Links

Browse

Recent Issues

Browse Archives

Contact Info

Banda Aceh, Indonesia
+6281360650791
masriali@unsyiah.ac.id
Week Days: 09.00 to 17.00
Sunday: Closed

Article

Program Pendampingan Penguasaan Cetak Massal untuk Pengembangan Industri Kreatif Rencong Souvenir

Authors Husni Husni, T. Edisah Putra, Husaini, Arhami, Masri Masri, M. Nizar Machmud, M Nural Fajri

Affiliations

Husni Husni: Universitas Syiah Kuala

T. Edisah Putra: Universitas Syiah Kuala

Husaini: Universitas Syiah Kuala

Arhami: Universitas Syiah Kuala

Masri Masri: Universitas Syiah Kuala

M. Nizar Machmud: Universitas Syiah Kuala

M Nural Fajri: Universitas Syiah Kuala

Published 2025-03-31

Section Article

DOI https://doi.org/10.56347/kjpkm.v4i1.297

Issue Vol. 4 No. 1 (2025): March

567

Views

246

Downloads

Altmetrics

Abstract

This community service program aims to increase the production capacity of the creative rencong souvenir industry through mentoring in mastering mass printing technology. The rencong, as a traditional Acehnese weapon, has been transformed into a souvenir product with significant economic potential, yet it remains constrained by the limitations of conventional production techniques. Through this program, craftsmen and small and medium enterprises (SMEs) in the rencong souvenir sector receive intensive training and mentoring on efficient and high-quality mass printing techniques. The methods employed include technology transfer, hands-on training, and continuous monitoring to ensure program sustainability. The expected outcomes are improved productivity, production efficiency, and product quality standardization, ultimately enhancing the competitiveness of the creative rencong souvenir industry in both local and national markets. This program is also designed to positively impact local economic empowerment while preserving Aceh's cultural heritage through innovative creative industry products.

Keywords

Technical Assistance; Mass Printing; Creative Industry; Rencong Souvenirs; SME Empowerment

References

Akhyar, H., & Husaini. (2016). Study on cooling curve behavior during solidification and investigation of impact strength and hardness of recycled Al–Zn aluminum alloy. International Journal of Metalcasting, 10, 452–456. https://doi.org/10.1007/s40962-016-0024-8
Akhyar, H., Malau, V., Suyitno, & Iswanto, P. T. (2017). Hot tearing susceptibility of aluminum alloys using CRCM-horizontal mold. Results in Physics, 7, 1030–1039. https://doi.org/10.1016/j.rinp.2017.02.041
Akhyar. (2014). Perancangan dan pembuatan tungku peleburan logam dengan pemanfaatan oli bekas sebagai bahan bakar. Dalam Seminar Nasional Sains dan Teknologi 2014 (hlm. 1–6). Fakultas Teknik Universitas Muhammadiyah Jakarta.
Akuan, A. (2009). Tungku peleburan logam. Universitas Jenderal Ahmad Yani.
Alaneme, K. K., & Olanrewaju, S. O. (2010). Design of a diesel fired heat-treatment furnace. Journal of Minerals & Materials Characterization & Engineering, 9(7), 581–591.
Ana, G., Wanga, Y., Lia, W., & Liub, J. (2012). Research on key designing parameters of destruction furnace for explosive waste. Procedia Environmental Sciences, 16, 202–207.
Iswanto, P. T., Akhyar, & Maliwemu, E. U. K. (2019). Fatigue crack growth rate of motorcycle wheel fabricated by centrifugal casting. Metalurgija, 58(1-2), 51–54.
Malau, V., Akhyar, & Iswanto, P. T. (2018). Modification of constrained rod casting mold for new hot tearing measurement. Archives of Metallurgy and Materials, 63(3), 1201–1208. https://doi.org/10.24425/123792
Mubarak, A. Z., & Akhyar. (2013). Perancangan dan pembuatan dapur peleburan logam dengan menggunakan bahan bakar gas (LPG). Jurnal Teknik Mesin Unsyiah, 1(3), 128–132.
Pambekti, A., Akhyar, H., & Iswanto, P. T. (2018). Pengaruh variasi suhu tuang dengan heat treatment T4 terhadap sifat mekanis pada aluminium paduan 2024. Prosiding KITT (Konferensi Ilmiah Teknologi Texmaco), 1, 61–65.
Suprapto, W. (2017). Teknologi pengecoran logam. Universitas Brawijaya Press.