Inventivitas Pengrajin Rencong Suevenir dalam Mewujudkan Gampong Wirausaha

Masri Ali; M. Nizar Machmud; Iskandar; Akhyar; Husni; T. Edisah Putra; Sulaiman Thalib; Masri Ibrahim

doi:10.56347/kjpkm.v1i2.85

About This Journal

Kawanad: Jurnal Pengabdian kepada Masyarakat is a peer-reviewed journal publishing innovative and impactful community service results. Published biannually in March and October, this journal...

Learn More

Quick Links

Browse

Recent Issues

Browse Archives

Contact Info

Banda Aceh, Indonesia
+6281360650791
masriali@unsyiah.ac.id
Week Days: 09.00 to 17.00
Sunday: Closed

Article

Inventivitas Pengrajin Rencong Suevenir dalam Mewujudkan Gampong Wirausaha

Authors Masri Ali, M. Nizar Machmud, Iskandar, Akhyar, Husni, T. Edisah Putra, Sulaiman Thalib, Masri Ibrahim

Affiliations

Masri Ali: Universitas Syiah Kuala

M. Nizar Machmud: Universitas Syiah Kuala

Iskandar: Universitas Syiah Kuala

Akhyar: Universitas Syiah Kuala

Husni: Universitas Syiah Kuala

T. Edisah Putra: Universitas Syiah Kuala

Sulaiman Thalib: Universitas Syiah Kuala

Masri Ibrahim: Universitas Syiah Kuala

Published 2022-10-30

Section Article

DOI https://doi.org/10.56347/kjpkm.v1i2.85

Issue Vol. 1 No. 2 (2022): October

34

Views

1.276

Downloads

Altmetrics

Abstract

In Aceh Besar, Suka Makmur and Lam Phueot villages, lotus root souvenir manufacturing faces several obstacles such as inadequate marketing strategies and lack of skill in the process. Therefore, this initiative seeks to provide partners with production-related solutions by integrating technology with Rencong souvenir molds. The implementation team also performs socialization and consulting related to internet marketing of products to increase market access and outreach. Program objectives were achieved using the Participatory Rural Assessment Act (PRA). From this initiative, his Mitra Pak Majid of Rencong Souvenir Crafts was able to provide capital support in the form of a bulk casting business.

Keywords

Rencong Souvenirs; Bulk Print; Print; Casting Technology

References

Ana, G., Wanga, Y., Lia, W., Liub, J., (2012), "Research on key designing parameters of destruction furnace for explosive waste" ,Procedia Environmental Sciences 16 - Science Direct, pp. 202-207.
Astuti, M., Prawoto, P., Irawan, Y. S., & Sugiono, S. (2018). The eco-innovation variables which influence the performance of Creative Industries center of natural stone crafts. Journal of Ecological Engineering, 19(1), 14-24. https://doi.org/10.12911/22998993/79446
Atmoko, W. B., & Setyawan, D. (2013). Green Marketing: Memperkuat Daya Saing Merek. Proceeding Seminar Nasional Dan Call for Papers Sancall.
BPS. (2021). Kecamatan Kalisat Dalam Angka Tahun 2021. In Badan Pusat Statistika Kabupaten Aceh.
Djuwita, T. M. (2011). Pengembangan Sumber Daya Manusia Dan Produktivitas Kerja Pegawai. Manajerial: Jurnal Manajemen Dan Sistem Informasi, 10(2), 15-21. https://doi.org/10.17509/manajerial.v10i2.2161
Lubis, R. H. (2018). Analisis Kinerja Ekspor- Impor Buah-Buahan Indonesia Pada Perdagangan Internasional. Al-Masharif: Jurnal Ilmu Ekonomi Dan Keislaman, 6(1), 103-116. https://doi.org/10.24952/masharif.v6i1.1129
Miedzinski, M., Charter, M., & O’Brien, M. (2013). A guide to eco-innovation for SMEs and business coaches. Eco-innovation Observatory (EIO), 70.
Muslim, M. I., Pusakaningwati, A., & Misbah, A. (2016). Studi Kelayakan Usaha Penggilingan Batu Tenaga Mesin Pada Ud. Pro Wijaya Gampong Jeruk Purut Gempol Pasuruan. Journal Knowledge Industrial Engineering, 3(2), 1-16. https://doi.Org/https://jurnal.yudharta.ac.id/v2/index.php/jkie/article/view/
Nasution, E. (2014). Motivasi Kerja Dalam Meningkatkan Produktivitas Kerja Pegawai Fakultas Dakwah lain Ar-Raniry. Jurnal Al-Bayan, 20(1), 1-14. https://doi.org/10.22373/albayan.v20i29.110
O’Hare, J. A., McAloone, T. C., & Thomas J. Howard. (2014). Eco-innovation Manual: Working version for Pilot Application. Working Version for Pilot Application. United Nations Environment Programme. General.
Office of Adolescent Health. (2014). Building Sustainable Programs: The Resource Guide. U.S. Department of Health and Human Services (HHS), Office of Adolescent Health, March.
Pujari, D. (2006). Eco-innovation and new productdevelopment: Understanding the influences on market performance. Technovation, 26(1), 76-85. https://doi.Org/10.1016/j.technovation.2004.07.006
Purwandhito, P. A., & Wp, S. N. (2015). Analisis Penyebab Kegagalan Produksi Batu Bata Hasil Mesin Extruder dengan Menggunakan Metode FTA(Fault Tree Analysis) (Studi Kasus di Perajin Batu Bata Ngunut, Kabupaten Klaten). Industrial Engineering Online Journal, 4(3), 1-12. https://ejournal3.undip.ac.id/index.php/ieoj/article/view/9016
Putra, A. A. G. D. D., Paramadhyaksa, I. N. W., & Bupala, I. B. N. (2017). Work Safety and Health Principles (K3) in the Design of Workshop Center of Artificial Natural Stone in Gianyar, Bali. Journal ofA Sustainable Global South, 1(2), 10-14. https://doi.org/10.24843/jsgs.2017.v01.i02.p03
Sabirin, & Atem. (2016). UMKM, MEA, Pembangunan Ekonomi. Jurnal Kewirausahaan Dan Usaha Kecil Menengah, 1(2), 41-50.
Solechan, & Kiswanto, A. (2018). Peningkatan Produksi dan Kekuatan Mekanik Batu Bata Press Menggunakan Mesin Cetak Kapasitas 1000 Buah / Jam pada Usaha Keluarga di Gampong Kalipucang Kulon. Jurnal Surya Masyarakat, 1(1), 40-46. https://doi.Org/10.26714/jsm.1.1.2018.40-46
Susila, D. A. (2014). IMPRESIF BATU ALAM (Sebuah Kajian Kerajinan Batu Alam di Gampong Ngeposari Kecamatan Semanu Kabupaten Gunungkidul Yogyakarta). CORAK Jurnal Seni Kriya, 3(2), 143-157. https://doi.org/10.24821/corak.v3i2.2352
Yarrow, T., & Jones, S. (2014). “Stone is stone”: Engagement and detachment in the craft of conservation masonry. Journal of the Royal Anthropological Institute, 20(2), 256-275. https://doi.org/10.1111/1467-9655.12103.